Re: [AMC-List] 6 manifold gasket question

["Jim Blair" <carnuck@xxxxxxxxxxx>]

You have to seperate the intake/exhaust and replace the gasket between them 
to run the full intake/exhaust set and have it seal properly.


From: JOE FULTON <piper_pa20@xxxxxxxxxxx>
Subject: [AMC-List] 6 manifold gasket question
To: amc-list@xxxxxxxxxxxx
Message-ID: <20060621025843.79644.qmail@xxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset=iso-8859-1

I got the Napa intake/exhaust gasket manifold gasket
set for my 6 cylinder Gremlin X.  The gasket set has
an intake gasket which naturally covers only the
intake manifold mating surface (to the cylinder head).
It also includes a complete one-piece intake/exhaust
manifold gasket.  I know many folks don't use anything
but the intake manifold gasket (like the factory), but
I want to use the complete gasket.  However, my
question is, can you use the intake manifold gasket
along with the complete one-piece gasket.

Also on the one piece gasket, it is not marked as to
which side goes toward the cylinder head.

BTW this appears to be a Victor gasket set relabeled
as a Napa part.  Any help appreciated before tomorrow
evening.

Regards,
Joe Fulton
Salinas, CA

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com