Re: [AMC-List] my 62 classic project

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: Mark Price <markprice242@xxxxxxxxxxxx>
" 
" I think the Jeep tailhousing will be too short to work for adapting to a torque tube. You will likely end up a good foot shorter than the torque tube tranny!

better too short than too long!  plenty of room to machine a block
with the tailhousing pattern on one side and the torque tube pattern
on the other - and while we're at it, a tranny mount on the bottom and
speedo drive on the side...

i think the only showstopper would be if the mainshaft is way too
short.  there are longish output yokes that can make up a few inches.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com