Concord Dash Fix
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Concord Dash Fix



Date: Mon, 11 Jul 2005 08:33:06 -0400
From: amcnut@xxxxxxxxxxxxxx
Subject: Re: Concord turn signals
To: mail@xxxxxxxxxxxx
Message-ID: <ADVANCES62K5LqN33HF0000248f@xxxxxxxxxxxxxxxxxxxxxxx>

Richard:
It should be relatively easy to remove the dash cluster from that Concord. There
are about 5 or 6 screws that run along the upper edge of the dash cluster, a
couple of screws just inside the glove box door, and a screw on the side between
the wiper and headlight switch. You will have to snake your hand up behind the
cluster and unscrew the speedo cable, then the whole cluster assembly should
just tilt forward at the top and lift up out of the dash. Unplug the wiring and
you're free!


What might be screwing you up is the fact that the overlay for the cluster
includes that piece that surrounds the center AC vents and that all of it must
be removed as a unit. However, it's not too bad a deal. I've taken enough of
those dashboards apart I can pretty much do it blindfolded.


Also, glad to hear you finally found the "other" flasher and fixed your problem!

Jeff Reeves
Auburn GA
79 Spirit GT
73 Javelin 401
72 Javelin SST



THANKS all of you.
Everything is to what you have said. The top screws came out w/no problem. I have the "omega" bracket un bolted, but something around the column is still bolted or so. So everything is loose exvept for above that column and it is tight. Just cannot see anything there. But, I have reached the speedo cable through the radio hole and at this point that's all I need to worry about. And the flashers are a go.
Thanks again for all the help!



Richard



Richard Estermyer 6235 S. Mohawk Avenue Ypsilanti, MI 48197

734.483.5187
734.320.7066 cell
javelinman74@xxxxxxxxxxx

Check out my hobby!
www.a70sthingautomobilia.com








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated