Re: Need TV rod
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need TV rod



On Thu, 9 Jun 2005 farna@xxxxxxx wrote:

Should be the same as Concord and Spirit anyway, and possibly 72+ Hornet and Gremlin.

I just made one from 7/32" drill rod, a 90-degree bend at one end (washers, cotter pins) and a folded-steel clevis and pinned threaded rod coupler. I couldn't find one locally after a month of looking.

Probably you will find one in 10 minutes. They should not be rare.
They'll vary with the throttle linkage setup; my 81 intake manual
has the hang-low bracket.

Now that I made one, I'll probably see two every time I go to
U-Pull-It.







Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated