Re: power steering pump replacement

["Jay" <jciampi@xxxxxxxx>]

I looked a little deeper in the  IPC and it shows that the support bracket 
in ther back of the pump was used only on AC equipped cars.  Should have 
done my homework better.

Jay
----- Original Message ----- 
From: <farna@xxxxxxx>
To: <mail@xxxxxxxxxxxx>
Sent: Tuesday, May 03, 2005 7:34 AM
Subject: Re: power steering pump replacement


> Jay, it it's of concern get a piece of flat bar from the hardware store 
> and make one. Could be that it stabilizes the pump enough to increase the 
> life of the front bearing. Might be a mid year addition or a dealer 
> installed item when there were problems. Could also be something that 
> people left off when working on cars -- these things are old!!
>
> On May 2, 2005 Jay Ciampi wrote:
>
> > This bar is shown in the TSM and bolts to the bolt sticking out of the 
> > back
> > of the resevoir and connects to the block. The front of the pump is
> > suspended from a solid bar with 2 bolts.
> >
> > Jay
> > ----- Original Message -----
> > From: <mail@xxxxxxxxxxxx>
> > To: <mail@xxxxxxxxxxxx>
> > Sent: Monday, May 02, 2005 8:53 AM
> > Subject: Re: power steering pump replacement
> >
> >
> > >I can't remember seeing any sort of stabilizer bar on any of the ones 
> > >I've
> > >worked on.
>
>
> =============================================================
> Posted by wixList Archiver -- http://www.amxfiles.com/wixlist