Jay, it it's of concern get a piece of flat bar from the hardware store and make one. Could be that it stabilizes the pump enough to increase the life of the front bearing. Might be a mid year addition or a dealer installed item when there were problems. Could also be something that people left off when working on cars -- these things are old!! On May 2, 2005 Jay Ciampi wrote: > This bar is shown in the TSM and bolts to the bolt sticking out of the back > of the resevoir and connects to the block. The front of the pump is > suspended from a solid bar with 2 bolts. > > Jay > ----- Original Message ----- > From: <mail@xxxxxxxxxxxx> > To: <mail@xxxxxxxxxxxx> > Sent: Monday, May 02, 2005 8:53 AM > Subject: Re: power steering pump replacement > > > >I can't remember seeing any sort of stabilizer bar on any of the ones I've > >worked on. ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist