why not just use tremec 3650... i think it is!!! used it in my 68 jav and only had to shorten input about 5/8 of an inch bolted right up to amc bell [t-150] pattern ...these tranny's much better than w.c. or non w.c.and definately better than those borg 4-sp's ----- Original Message ----- From: <mail@xxxxxxxxxxxx> To: <mail@xxxxxxxxxxxx> Sent: Monday, April 25, 2005 4:51 PM Subject: Re: Ouch T-5 > These are the teeth the synchro gear engage. Part of the gear itself. > If I had it to do over again I would have just bought new. They are available and not real pricey. $40-$60 a piece depending on what gear you are looking at. > I emailed the second seller and he asures me that this won't be a problem with the second set. He sadi the only reason he is selling this stuff off is noone wants the non world class trannys rebuilt anymore. He said last one he went ahead and put together he lost money on. So the few he has that need repaired he is parting out to get rid of them and will only deal in World Class stuff in the future. He said he personally doesn't see a whole lot of difference in the life expectancy of early world class and non world class. It's just a whole image thing. The early non world class and non world class all have the same torque rating. > I've got my fingers crossed. > Mark Price > mpriceAtwestco.net > Morgantown, WV > 69 AMC rambler, 4.0L, EFI, 5 speed > 65 Ambassador Conv, 327 AUTO, Basketcase > 01 S-10 CREWCRAP 4X4 > > > > ---------- Original Message ---------------------------------- > From: farna@xxxxxxx > Reply-To: mail-From-mprice-westco.net@xxxxxxxxxxxx > Date: Mon, 25 Apr 2005 15:30:05 -0400 > > >Well, can you just buy the synchro set, or are the "teeth" you refer to on one of the main gears? > > > >On April 25, 2005 mail@xxxxxxxxxxxx wrote: > > > >> Weel, Lesson leraned to late. > >> If you are going to scratch build a T-5, DON"T Buy used parts unless you have some very detailed pics or can lay your hands on them! > >> The first set of gears I received are so worn out they are unusable. Gears are fine. The synchonizer Dogs/Teeth are worn out from torque load almost halfway through! > >> Of course the guy offered to refundmy money if I returned the gears, minus shipping both ways. Which will net me about $12 back on my $46 investment. If he ever sends me the the refund. > > > > > >============================================================= > >Posted by wixList Archiver -- http://www.amxfiles.com/wixlist > > > > > > > > > > > > > > > > > > > > > > > > >