EBay #4538877364 Can this be used in an 85 Eagle? Seems there should be some type of ready made cross member I can use to put a 360 in it. I want the easy and quick way to do it. Fabricating one is out of the question. While minor alterations would be okay. My Eagle has a good motor. But I want the 360 / 727 combo with HEI and possibly Fuel Injection. I just want a simple solution to drop one in. Also seems like most of the technical Innovation from listers and others (Jeep lists) is on many web sites. The Archives don't give you the complete story. Would it be possible to put most of it on one or two web sites? It seems like the same questions get asked over and over, and the same answers returned. One site will free up the list to pursue other technical issues that don't involve swaps. This has probably been addressed before but I have to ask. Thanks for the great tips from every one! Rick 70 Ambassador SST 4 door 85 Eagle Wagon Limited 84 Eagle Sedan 4 door 89 Jeep G W 360 98 Kia Sportage beater -----Original Message----- From: neprocap@xxxxxxx [mailto:neprocap@xxxxxxx] Sent: Tuesday, March 29, 2005 7:04 AM To: mail@xxxxxxxxxxxx Subject: Re: Park Brake Release Handle: Removable? John, Depending on which handle you have in your car (there's a sharp angled handle and a smooth rounded handle) new ones may still be available from GM. Last time I looked (a few years ago) the smooth rounded release handle was still available new from GM. They were only about $5 or $6. If your local GM dealer can no longer get them I am sure you can find them cheap enough from one of the thousands of classic GM parts suppliers. The smooth rounded handles were used on many GM products up into the 80's. The latest thing I remember seeing them in was a 80's Blazer. On March 29, 2005 Bryan Morrow wrote: > I believe it should unscrew As my 73 AMX Does > > ----- Original Message ----- > From: "John W Rosa" <JohnRosa@xxxxxxxxxxxxxx> > To: "AMC List" <mail@xxxxxxxxxxxx> > Cc: "BaadAssGremlins" <BaadAssGremlins@xxxxxxxxxxxxxxx>; "AMC Eagle group" > <AMC_Eagle@xxxxxxxxxxxxxxx> > Sent: Monday, March 28, 2005 2:28 PM > Subject: Park Brake Release Handle: Removable? > > > > > > Re: 73 Hornet Parking Brake Release Handle. > > > > Is the black plastic handle 'removable' from > > the cable itself? I'd like to do so to make > > cleaning it up/re-painting it easier than > > doing it in-car. > > > > If they come off...anyone know of any NOS or > > excellent original handles available? > > > > Thanks in advance, > > > > John > > > > > > > > > > > > > > > > > > > . ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist