Re: T-10 Transmissions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: T-10 Transmissions



>From the replies I've gotten, both of these transmissions should have the
same gear ratios. That puzzles me since they have different part numbers.

-Steve-


----- Original Message -----
From: <mheinson@xxxxxxxxx>
To: <mail@xxxxxxxxxxxx>
Sent: Thursday, March 10, 2005 10:10 AM
Subject: Re: T-10 Transmissions


> I believe that the number of grooves cut into the input shaft will
indicate the ratio of first gear. If both input shafts have the same number
of grooves, then they should have the same ratio. I think 2.23:1 is, by far
the most common. I've been out of the AMC thing for awhile, so my
recollection is a bit fuzzy. I'm slowly joining in again.
>
> Mark Heinson
> Kansas City, KS
>
> On March 9, 2005 Steven F. Brueggeman wrote:
>
> > Hey all,
> >
> > Got two T-10 transmissions lying around. First I believe is from a
Machine.
> > Tag has part #319 7057 and S4 T10 V (believe there is an 'A' in front
but
> > bolt head is in the way). Gear ratios should be, 1st 2.23:1, 2nd 1.77:1,
3rd
> > 1.35:1 and 4th 1.00:1.
> >
> > Second T-10 is out of my '70 AMX. Tag has part #319 5889 and S2 T10 V
(again
> > should have the 'A' in front). Anyone know what gear ratios are in this
> > trans?
> >
> > Thanks,
> > -Steve-
> >
> >
> >
> >
> >
> >
> >
> > .
>
>
> =============================================================
> Posted by wixList Archiver -- http://www.amxfiles.com/wixlist
>
>
>
>
>








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated