Re: more 67 American parts..CLUTCH Z-bar (equalizer)and pivot..Might fi
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: more 67 American parts..CLUTCH Z-bar (equalizer)and pivot..Might fit Gremlin/Hornet?



" From: Mark Price <mail@xxxxxxxxxxxx>
" 
" I'm using six Cylinder Clutch setup in mine. It's a 4.0L with AMC T-5.
" It uses the V-8 bellhousing so, I'm thinking it would work on a V-8 car.
" []
" From: "Jim Blair" <carnuck@xxxxxxxxxxx>
" 
" A: Mark, I just thought I'd mention the T5 you have is not likely to stand 
" long behind a V8 (indeed, they die often behind the 6 cyls) It is one of the 
" weaker W series. I used to have a Y series (from a 5.0L Ford) but if you 
" race, the Z series was the best bet below a real Tremec.

even the z isn't really v8-rated, unless you're talking 304.  maximum
rating is 330 ft-lbs.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen

adh@xxxxxxxxxxxxxxxxx                       and think what none thought





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated