Re: axle shafts (was Re: Islam-a-Bad)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: axle shafts (was Re: Islam-a-Bad)



Right now I run 33x12.5-15 Goodyear MT/Rs with white spoke Rockcrawler steel
rims. Truck came factory with a 4" lift. Has the 12 leaf front springs.

----- Original Message ----- 
From: "Jim Blair" <carnuck@xxxxxxxxxxx>
To: "amc" <mail@xxxxxxxxxxxx>
Sent: Saturday, January 01, 2005 8:35 AM
Subject: axle shafts (was Re: Islam-a-Bad)


> A: I will skip the religious stuff except to note I have family in
Indonesia
> and other countries doing what the bible tells them to. (several have lost
> their lives in that effort) As for the axles, do you have a D60-2 or Dana
44
> rear axle? Moser are good, but I upgraded my J4000's rear axle to a J20
full
> float. I could have used the parts front axle I had to make it 5 lug, but
> the closed knuckle dana 44 front axle is begging to be swapped as well (I
> have that from a J20 as well, but it requires some mods to bolt in, unlike
> the rear axle) I also did a rear shackle flip to gain 8" of rear lift to
> clear 33/12.50/16.5 tires on wagon wheels, even fully loaded (2 tons of
> brick and a bunch of other stuff.)
>
>
> From: "Steven M.Dristy, Jr." <soundwve@xxxxxxx>
> Subject: Re: Islam-a-Bad
> To: mail@xxxxxxxxxxxx
> Message-id: <002801c4eefc$c9fbace0$2802a8c0@xxxxxxxxxxxxxxxx>
>
>  And people wonder why I live in Alaska. Here you learn tolerance, or you
> don't walk the streets alone at night. (Utter an anti-Alaska Native slur
in
> Fairbanks, and you'd better run!!)
>
> (snip)
>  Please take your religion-based hatred somewhere else. It is not welcome
> nor wanted here, and I do not wish to read it.
>
>  AMC content: broke an axle shaft in my '73 J-4000, and need to order a
new
> one. Want to buy
>
>  a set of Moser axle shafts. Anyone had experience with this
manufacturer??
>
>
>






Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated