I'll try to summerize where Im at:
New distributor (rebuilt by me, with Pertronix unit installed) New wires, plugs,starter, coil
Old everything else!
Ok, she runs now. I did the dowel, static timing, to get her to TDC and get the distributor set up. And she starts and runs. Part of the problem I think was I was running on old gas. I ran a line to a gas can and im running at 20 degrees TDC. Anything lower or higher and she stalls out. I tried to get her to 10 degrees TDC but it would stall out. No matter how it is running (at 20, 18, 25...) she backfires alot. Putt putt pop pop putt putt putt.... No matter what timing I get backfiring.> ..the saga continues...