Re: [BaadAssGremlins] Rear End Change
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Rear End Change



I think you want a 8 or 9 inch from a 65/66 Mustang....I have a 8 
inch(65 Mustang) under my 74 Gremlin with 4.10 gears/mini spool that I 
have been pounding on hard for the last 8 years or so with up to 300+ RW 
HP from a 401 and have yet to break it..using MT dot drag tires

I think one is 43 1/2 and the other 44 inches wide spring perches
not sure which is which....bolted in with no problems.....

77-81 Versailles 58.50 inches wide .. flange to flange

65-66 Mustang 57.25 inches

67-70 Mustang 59.25 inches

AMC 20 58.5 inches wide.... F to F

Jim Shadwick
Treasure Valley AMC Club of Idaho
http://idahoamcrambler.com/
208-899-7616


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated