Re: [BaadAssGremlins] engine help needed

in Addition to what Rick said......What intake is on it? What was the cam break in procedure that you did? Does the intake have the metal pan under it? Oil can and will get sucked into the PCV.

From: Rick Griffin <amc_poppy@xxxxxxxxx>
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Sent: Mon, August 15, 2011 7:04:02 PM
Subject: Re: [BaadAssGremlins] engine help needed

Intake manifold gasket? Did he use the metal pan gasket ? Did he mill the heads? Deck the block?You may need to mill intake. I use the thicker Mr Gasket intake gaskets and silicone on the ends of manifold .

--- On Mon, 8/15/11, Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx> wrote:

From: Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
Subject: [BaadAssGremlins] engine help needed
To: amc-list@xxxxxxxxxxxx, baadassGremlins@xxxxxxxxxxxxxxx
Cc: "harry bublitz" <nash126@xxxxxxxxxxx>
Date: Monday, August 15, 2011, 9:20 AM

I'm in need of some engine info.I recently professionally had my 401 rebuilt top to
bottom.We fired it up ran good with 80 oil pressure. Started it again at this point it
only has headers on it. We noticed on the left bank header oil is seriously coming out the
end.The next day i had the dull exhaust completed. fired it up ex-stream smoke pouring out
both sides it doesn't appear to be blue oily smoke.The engine sounds sick it wont rev up
to it's full potential sounds like possible a dead cyl. Not at first but now the car wont
go under it's own power put it in gear it dies. The engine at most has 30 minutes idle an
revving time. I'm afraid this guy may have possibly way over revved it.Oil pressure now is
down to 40 pounds. Dose anyone have any ideas on whats going on? Thanks Ed for the use of
your great site. Harold nash126@xxxxxxxxxxx 262-903-3993 08/15/2011 02:46:42 AM
=============================
feel free to reply & also copy your reply to Harold who would appreciate any advice &
thanks in advance to all who might reply.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com