Re: [BaadAssGremlins] Re: headers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re: headers





Yes ALL Amc 401 and 390's came stock with forged cranks. Forged cranks could also be had back in the day for the 290 and 343 by special order. Group 19 parts. Just like forged rods for the 290 were available. 

Sent from my iPhone

On Apr 30, 2011, at 12:07 AM, Rick Griffin <amc_poppy@xxxxxxxxx> wrote:

 

I think all 401 cranks are forged-fooling with them for 35 years I have never seen a 401 cast factory crank.

--- On Fri, 4/29/11, Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx> wrote:

From: Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
Subject: Re: [BaadAssGremlins] Re: headers
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Date: Friday, April 29, 2011, 5:23 PM

 

After 72 the hp went down, and was measured differently if I recall. The 401s in 1974 were anemic about 250hp or so, bridged rockers, smogged and fedded out.
 
On the crank question:
 
Did all 401s have a steel crank?
Olly
 
No...you had forged and cast cranks
 
 
good book above whether novice or pro.
 
Now back to the royal wedding.
----- Original Message -----
Sent: Friday, April 29, 2011 4:15 PM
Subject: Re: [BaadAssGremlins] Re: headers

hp for the 401 depends on the year . i think the 77 was around 150 hp.



From: Davis <martin-davis@xxxxxxxxxxxxx>
To: "BaadAssGremlins@xxxxxxxxxxxxxxx" <BaadAssGremlins@xxxxxxxxxxxxxxx>
Sent: Wed, April 27, 2011 9:17:25 AM
Subject: Re: [BaadAssGremlins] Re: headers

 
Course the etc engine has less hp then a slightly modified 401. Heck even stock for stock isn't the 401 more hp? I remember 330 hp for the 01.

Sent from my iPhone

On Apr 27, 2011, at 11:07 AM, Rick Griffin <amc_poppy@xxxxxxxxx> wrote:

 
I was ruined back in the 70s when I discovered my future mentors 69 Big Bad Blue AMX super stocker had been converted to a SBC to run brackets. Never got over it.  SBC+ AMC = BAD

--- On Wed, 4/27/11, themixtoo@xxxxxxx <themixtoo@xxxxxxx> wrote:

From: themixtoo@xxxxxxx <themixtoo@xxxxxxx>
Subject: Re: [BaadAssGremlins] Re: headers
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Date: Wednesday, April 27, 2011, 9:35 AM

 
Wait... I got a Subaru WRX motor and trans....half the weight and AWD...the possibilities are endless 8-) they don't call me 'TheMix' for nothin'



-----Original Message-----
From: hotrod74gremlinx@xxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Sent: Wed, Apr 27, 2011 6:01 am
Subject: Re: [BaadAssGremlins] Re: headers

 
Better than a GD sb chevy!




-----Original Message-----
From: themixtoo <themixtoo@xxxxxxx>
To: BaadAssGremlins <BaadAssGremlins@xxxxxxxxxxxxxxx>
Sent: Tue, Apr 26, 2011 4:55 pm
Subject: Re: [BaadAssGremlins] Re: headers

 
Now that I think about it.... I've got this Boss 351 Cleveland motor just layin' around. Think I'll ditch that ol' sbc and try something a bit more interesting.  Wait....I got a 406 Tri-power FE Ford big block too...And the distributor is almost in the right place on both of them...What'a you think Bart?   Gary 'TheMix' 



-----Original Message-----
From: hotrod74gremlinx@xxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Sent: Tue, Apr 26, 2011 12:09 am
Subject: Re: [BaadAssGremlins] Re: headers

 


aaand the dist was in the right place too lol
Bart

-----Original Message-----
From: bob <baddassgremlin@xxxxxxx>
To: BaadAssGremlins <BaadAssGremlins@xxxxxxxxxxxxxxx>
Sent: Tue, Apr 26, 2011 12:08 am
Subject: [BaadAssGremlins] Re: headers

 
That's what we're talkin bout ! ! ! A member on the Yahoo Pacer group put a caddy engine in his Pacer years ago, and had fantastic times with it at the strip... And it was a conversation piece no matter where he went..

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, Ed Veneck <edveneck@...> wrote:
>
> I friend of my has a 1971 472cid Cadillac motor sitting in his garage, that he wants to sell.  A 472 cid in a Gremlin.............hummmmmmmmmmmm
>  
> Ed
>
> --- On Mon, 4/25/11, bob <baddassgremlin@...> wrote:
>
>
> From: bob <baddassgremlin@...>
> Subject: [BaadAssGremlins] Re: headers
> To: BaadAssGremlins@xxxxxxxxxxxxxxx
> Date: Monday, April 25, 2011, 10:46 PM
>
>
>  
>
>
>
> Bart,
> You're correct on the boring part.. I do like chevys (own 3 of them for my daily drivers) but I agree,, IF you are going to put something in to an AMC other then an AMC engine,, it should be "different" A chevy small block 350 is too "Cookie Cutter" Go the extra mile and stuff a new generation 8.1 liter Chevy into it, or maybe a Triton V8 out of a wrecked Mustang and make it worth the effort..... But,, no matter what anyone does to their AMC,, make it "yours", put all the Ideas and Dreams into it that you want to, and Have FUN ! ! ! !
>
> --- In BaadAssGremlins@xxxxxxxxxxxxxxx, hotrod74gremlinx@ wrote:
> >
> > The point I'm trying to make is the 350 Chevy swap is BORING! anything but that motor pleeease!!!
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: LarryS <vision1@>
> > To: BaadAssGremlins <BaadAssGremlins@xxxxxxxxxxxxxxx>
> > Sent: Mon, Apr 25, 2011 4:06 pm
> > Subject: RE: [BaadAssGremlins] Re: headers
> >
> >
> >
> >
> >
> >
> > Funny thing,
> > Back in the early 80s, when you could hardly GIVE AWAY a Gremlin, any time that a Gremmie (or about any car) was fitted with a SBC, the response was, "wow! cool, man! that is the greatest thing ever!!"
> > But now that rarity is involved, there seems to be this museum curator attitude developing. This puritanical ideal.
> > And I suppose it's only natural No more are being made. There was much waste, much destruction, many opportunities missed -- like you say, they went to the crusher in droves. So the puritans are only gonna get worse.
> >
> > Any driving Gremlin (or Pacer, or Matador, etc.) ALREADY breaks the "boring" mold. In 1984? Snooze. Today? It's special if it's merely on 4 wheels. 232-6 or SBC350, no matter, it CAN'T be boring. Not now. Not any more.
> >
> > L.
> >
> >
> >
> >
> >
> > From: BaadAssGremlins@xxxxxxxxxxxxxxx [mailto:BaadAssGremlins@xxxxxxxxxxxxxxx] On Behalf Of hotrod74gremlinx@
> > Sent: Monday, April 25, 2011 2:31 PM
> > To: BaadAssGremlins@xxxxxxxxxxxxxxx
> > Subject: Re: [BaadAssGremlins] Re: headers
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Well no offense man but AMCers are a loyal bunch and while its good you saved it from the crusher I still stand by my "belly button 350 swap" statement. its a boring engine hell a Mazda rotary would be someting different at least.
> > Bart
> >
> >
> >
> >
> >
> >
> > On Apr 25, 2011, at 9:38 AM, "dale" <dcharlesfridley@> wrote:
> >
> >
> >
> >
> >
> >
> > This car had a sbc put in it 20 years ago after being saved from the crusher. I forgot what I used at that time. Now they are worn out I should have know better than to ask.
> >
> > --- In BaadAssGremlins@xxxxxxxxxxxxxxx, Ed Veneck <edveneck@> wrote:
> > >
> > >
> > >
> > >
> > > Ãâ
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > If you want a SBC in your car, than build a Nova or any other Chevy.Ãâ Not only are the engines cheaper to built, but you can get any body part you want, plus upgrade up the ass.Ãâ Thats why you see about 30 or more of them for ever AMC the you see, at a show.
> > > Ed
> > > 72 Gremlin XÃâ / 401
> > >
> > >
> > >
> > > Ãâ
> > >
> > >
> > >
> > >
> > >
> > > I'm still considering a SBC for my Grem (currently has a '70 360 w/51cc dog leg ports).
> > >
> > >
> > >
> > >
> > >
> > >
> > > Why go backwards when your already ahead of the game with your set up you have now?? Everything with a SBC swap is friggin BORING! I love seeing traditional hot rods with motors like a "Nailhead Buick" or a "394 cubed Olds" and sure you pay more for parts and having it rebuilt but its much more satisfying in the end either blowing the doors off or outshining some belly button ass "tree fiddy" swapped set of wheels.
> > > Bart
> > > 74 Gremlin with a AMC 360 swap
> > >
> >
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated