Re: [BaadAssGremlins] Which Cylinder Heads ????

Ed,

I assume since you mention the edelbrock heads, money isnt the real issue. That being said heres what I think and why.

I would not even think about using anything but an aluminum head. Why? The aluminum Head has a more modern design, Better shaped combustion chamber, better runner design, better cooling effect of the aluminum, less detonation better complete fuel burn. The cost is about 2 times the cost of rebuilding the iron heads but the benifit is 4 times better. Also later when you decide you would like more power, you can send the heads out for a port job and get quite a bit more outta your engine.

I hope I have been clear....It doesnt matter which heads you go with, you have to think what are your future goals?

Davis

From: "mrmopar00@xxxxxxxxx" <mrmopar00@xxxxxxxxx>
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Sent: Tue, April 6, 2010 4:07:54 PM
Subject: Re: [BaadAssGremlins] Which Cylinder Heads ????

I would look an Eddy or indy SR head. Is it worth it to you to invest $ in the old iron head?
Olly

Sent from my BlackBerry device on the Rogers Wireless Network

From: Ed Veneck <edveneck@yahoo. com>

Date: Tue, 6 Apr 2010 16:02:59 -0700 (PDT)

To: <BaadAssGremlins@ yahoogroups. com>

Subject: Re: [BaadAssGremlins] Which Cylinder Heads ????

Yes, the first set is the worst, needing new valves, seats, guides and springs. The set with the bridged rockets just needs a valve job on it.

--- On Tue, 4/6/10, mrmopar00@yahoo. com <mrmopar00@yahoo. com> wrote:

From: mrmopar00@yahoo. com <mrmopar00@yahoo. com>
Subject: Re: [BaadAssGremlins] Which Cylinder Heads ????
To: BaadAssGremlins@ yahoogroups. com
Date: Tuesday, April 6, 2010, 5:56 PM

Do u have to put $ in the iron heads?
Olly

Sent from my BlackBerry device on the Rogers Wireless Network

From: Ed Veneck <edveneck@yahoo. com>

Date: Tue, 6 Apr 2010 15:36:59 -0700 (PDT)

To: Gremlin list<BaadAssGremlins@ yahoogroups. com>

Subject: [BaadAssGremlins] Which Cylinder Heads ????

I'm building a mild 401 street engine for my Gremlin, and I two heads to choose from. the first set is casting number 3216090 - from a 360/401 with 58cc chamber & stud rockets. The second is casting number 3231475 - from a 360/401 with 58cc chamber & bridged rockets. Which would be the better set of heads? I do plan on running a set of Roller Rocker Arms. Or should I just buy a set of Edelbrock Aluminum Heads.

Ed