[BaadAssGremlins] Fw: 66 6 cyl driveshaft removal question

["Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>]

The folks below are fixin to remove the driveshaft on their 66 Classic. Way out of my 
league however figured many of you have done this and could help out, thanks in advance to 
all who might reply with tips and advise, and be sure to copy your reply directly to them 
also.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com

----- Original Message ----- 
From: "Keith Evenson" <epd@xxxxxxxxxxxx>

Subject: 66 6 cyl


>I need to take the clutch out of a 66 Classic with a 6 cyl and need  any advice on what 
>or how to remove the drive shaft? I have not looked  at it too close but it is an 
>enclosed shaft (meaning there is a case  over the outside) and I have not dealt with that 
>kind of set up before.
> Thanks,
>
> Keith Evenson
>
>
>
>
> 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/