RE: [BaadAssGremlins] '74 Gremlin Door and Hood adjustment

Thanks Todd!

Can you recommend anyplace to find those bushings?

I’m having a hard time finding good parts sources.

Thanks!

Tim

From: BaadAssGremlins@xxxxxxxxxxxxxxx [mailto:BaadAssGremlins@xxxxxxxxxxxxxxx] On Behalf Of Todd Tomason
Sent: Friday, April 04, 2008 7:48 AM
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: Re: [BaadAssGremlins] '74 Gremlin Door and Hood adjustment

There's also a good chance that the door has worn bushings. Replacing the
bushings should true it up a bunch, then do your final adjustment as Davis
described.

Todd

On Thursday 03 April 2008 22:07, Davis Martin wrote:
> Tim,
> welcome! Adjusting the door is done by loosening the hinges and moving
> and also by moving the latch pin. The hood is most likely bent or the
> hinges are bent. This usally happens when the hinges are gummed up and
> someone forces the hood when closing it. There is some adjustment on the
> bolts holding the hinge to the body. Davis
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.5/1357 - Release Date: 4/3/2008 10:48 AM

No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.5/1357 - Release Date: 4/3/2008 10:48 AM