[BaadAssGremlins] Re: gremlin parts in columbus georgia
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Re: gremlin parts in columbus georgia



I hate to be that guy but I already had most of the motor from a 
previous project that went up in flames.  I have a somewhat limited 
budget, and I don't want to wait forever to be able to afford the 
100% AMC kick butt motor.  Besides for this project I kind of have a 
vision for the end product and there will be some changes to the body 
also.  I do promise that it will be an awesome car when done.

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, Davis Martin <martin-
davis@...> wrote:
>
> That sounds like a nice setup for a mustang.  A 401 will make more 
power and is a direct bolt into your gremlin. Save the ford mill for 
a ford missing a heart
>    P.S your gremlin will definitly need frame connectors and a 
rollbar. Roll bar can be got for a hornet from competition 
Engineering. 8 PT roll bar needed for 11.50  and faster
>    Here is a lil pump gas 401 gremlin street car
> http://s160.photobucket.com/albums/t172/GremlinXman/?
action=view&current=Picture003.jpg
>    Davis 
> danpeters1975 <danpeters1@...> wrote:
>           I have already pulled the rearend, I am not sure which it 
is or the 
> gears. If anyone could give me the info to ID it. I can pull the 
> motor and tranny in two months by my self. If someone needs or 
wants 
> it earlier I can get friends to help me. I just put a new clutch in 
> it as I drove it around occasionally. I have a 351w stroked to 434 
> and plan to put in a TKO600 5 speed. I will put in a 9 inch. I have 
> a couple of center sections to switch gears. The body is not in the 
> greatest shape but I will keep that for last. I am going to run it 
> on E85 and estimate power close to 600/600. Subframe will be put in 
> after I can pull all parts I want out and can mockup. I am pretty 
> sure I will need a cage. All around I think it should be a very fun 
> car.
> 
> --- In BaadAssGremlins@xxxxxxxxxxxxxxx, Davis Martin <martin-
> davis@> wrote:
> >
> > I think this says you are building a street/strip car and are 
> selling the amc 15 6 cyl rear end and soon the engine and tranny? 
> Then wehn you get better from your back surgery you will continue 
the 
> project. Hope this clears up any question for perspective buyers. 
> > Dan, Have you posted pics? What are your plans for this build? 
> > Davis 
> > 
> > 
> > danpeters1975 <danpeters1@> wrote:
> > I am working on a project 1975 gremlin for street/strip. 
> Currently I 
> > have the rear end available. soon I will pull the 3 speed tranny 
> and 
> > 232 engine. I am sure there will be other parts that will be 
> > available. Please ask any questions on what parts or when they 
will 
> be 
> > available. P.S. I have a small delay in pully any more parts I 
just 
> > had back surgery, but I will will be back into it soon.
> >
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated