[BaadAssGremlins] Re: Rear End

["Tim Kottman" <timkott@xxxxxxxxx>]

The best way to get the engine built would be to find an engine shop and talk to them  tell 
them what your wanting and they should be able to help you figure everything out, if they 
cant then its the wrong engine shop.  

as for a rear end a 
-9" out of a bronco (not bronco II) would work.  '62-70 is 1 inch shorter 
-8.8 out of a bronco II also would work but you have to flip the spring perches
-also mopar 8 3/4 out of big bodied cars would work. look for a 472, or 489 casting on 
the hog head. as they are beefier than the 471.  this will bolt right in with about a half inch 
leaf spring spread. 
-and a ford 8.8 out a Lincoln Versalles would work width wise though i believe new spring 
perches would need to be welded on.  this set up would give you disc brakes as well.  
-80's mustangs and thunderbirds i was told would work as well but you may have to work 
with the spring perches as well. 

Im doing the mopar 8 3/4 and it is fairly expensive.  i would probably go with a 9" or 8.8 
as you can find parts a little easier.  


--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "kiel.lampe" <kiel.lampe@...> wrote:
>
> Hello all, I appreciate all who gave suggestions on how to build my 
> 360.  I did purchase it - a 1982 or so AMC 360 complete with a 904 
> transmission all ready beefed up.  I'm thinking:
> 
> Edelbrock Performer Intake, Holley 4 barrel 600cfm, hooker headers, 
> still not sure on cam and lifters.  It's going to be street mainly for 
> having lots of fun, maybe the occasional strip.  Any input?
> 
> Any suggestions on a rear end that goes easily into a 73 Gremlin?  I'm 
> thinking Ford 9", but would consider something else that would hold up. 
> If a Ford, any ideas on a common vehicle found at junk yards I could 
> pull from?  Preferably disk brakes.
> 
> Thanks in advance and I'll keep you updated on how this winter project 
> moves along.
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/