Re: [BaadAssGremlins] Re: Rear crossmember

[Davis Martin <martin-davis@xxxxxxxxxxxxx>]

There are 2 sets of mounting holes in the frame rail on your gremlin. One is for the 6 cyl setup and the other is for the v-8.

 Davis  

Tim Kottman <timkott@xxxxxxxxx> wrote:

maybe try flipping the crossmember around...? like spinning it. just a thought im not
sure though...

--- In BaadAssGremlins@yahoogroups.com, "Larry" <chvyclss@...> wrote:
>
> I used a front V8 crossmember, but didn't know the trans crossmember
> was different for a V8. The front mounts are in place but the trans
> mount is off by 1 1/2 inch. I have the eng & trans in a '73 Gremlin. -
> -- In BaadAssGremlins@yahoogroups.com, thomas tisdale <tommymft@>
> wrote:
> >
> > I believe you need different mounts stands,and front
> crossmember,though I'm no expert
> >
> > Larry <chvyclss@> wrote: I just did a V8 conversion &
> used the rear crossmember from the 6 cyc
> > trans. When I reinstalled it, the mount is 1 1/2" behind the place
> it i
> > suppose to be. Is there a V8 rear crossmember or am I installing it
> > wrong. The trans came from a '68 Javelin connected to a 290. This
> group
> > has always been helpful in the past & I rely on the experts here.
> > Thanks for all the help. Larry
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > Check out the hottest 2008 models today at Yahoo! Autos.
> >
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___