I used a front V8 crossmember, but didn't know the trans crossmember was different for a V8. The front mounts are in place but the trans mount is off by 1 1/2 inch. I have the eng & trans in a '73 Gremlin. - -- In BaadAssGremlins@xxxxxxxxxxxxxxx, thomas tisdale <tommymft@...> wrote: > > I believe you need different mounts stands,and front crossmember,though I'm no expert > > Larry <chvyclss@...> wrote: I just did a V8 conversion & used the rear crossmember from the 6 cyc > trans. When I reinstalled it, the mount is 1 1/2" behind the place it i > suppose to be. Is there a V8 rear crossmember or am I installing it > wrong. The trans came from a '68 Javelin connected to a 290. This group > has always been helpful in the past & I rely on the experts here. > Thanks for all the help. Larry > > > > > > > --------------------------------- > Check out the hottest 2008 models today at Yahoo! Autos. > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BaadAssGremlins/join (Yahoo! ID required) <*> To change settings via email: mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/