Re: [BaadAssGremlins] Hedmann header set install tips?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Hedmann header set install tips?



YES YES YES!!
 Also if using a 727 you may need to bend the collector out some on the pas side as it hits the tranny.
 Davis

Jim Shadwick <idahoamx@xxxxxxxxx> wrote:
When I installed them on my Gremlin...I would do so with the motor
installed.....360/727.....
If you get the front of the car about 18 inches or so off the ground you
can get them in from underneath....
the driver side is easy....however on the passenger side you will need
to get the header in then install the starter and
then the header....works good for me....you will need to tie the header
up or have someone hold it while you
are installing the starter....a mini starter does work better....With a
727.....if you are using an after market shifter
it is best to have that installed and working before you put the
headers on.....

Jim


__._,_.___


SPONSORED LINKS
Automotive maintenance Automotive radiators Automotive radiator repair

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated