Re: [BaadAssGremlins] Hedmann header set install tips?

[Davis Martin <martin-davis@xxxxxxxxxxxxx>]

Bart is 100% correct on that one.

 You will need to jack the car up about 35 inches in the front and put them in from underneath. YOu will want to cut the flange off between the middle and rear tube on the drivers side otherwise you will have to remove your oil dipstick tube, trust me cut the flange.

 You can get a mini starter from Alterstart on ebay works great for about 135.00

 even the 1.75 hookers needed to be dinged even with the mini starter but as Bart said no issues with the 1 5/8 Headmans.

 Davis

 

baadass73gremlin@xxxxxxx wrote:

In a message dated 2/1/2007 10:13:00 P.M. Eastern Standard Time, dsinks@prodigy.net writes:

I have the El cheapo headmanns from summit racing.
Is there a procedure I want to follow to get these things installed? Do
I need a Mini starter?

I thought I heard on frans old form that they have to get dinged to fit
small body correctly. Not that I care but I would rather not trash
them.

Any pointers?

And thanks ahead of time.

Dennis

YOu have to ding em if their 1" 7/8's but if their just 1" and 5/8's they'll fit.Thats what I have and I had the Ford crapola starter/but I'd get a mini high torque one anyway as the headers right next to the starter and it gets hot and you get the dreaded ErrrrrrrrErrrrrrrErrrr sound after havein the car running after a while.

Bart

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___