Re: [BaadAssGremlins] Hedmann header set install tips? mini starter?

["Ms L.A. Kooker" <lumina333@xxxxxxxxx>]

Which mini starter do you recommend?
--- Jim Shadwick <idahoamx@xxxxxxxxx> wrote:

> When I installed them on my Gremlin...I would do so
> with the motor 
> installed.....360/727.....
> If you get the front of the car about 18 inches or
> so off the ground you 
> can get them in from underneath....
> the driver side is easy....however on the passenger
> side you will need 
> to get the header in then install the starter and
> then the header....works good for me....you will
> need to tie the header 
> up or have someone hold it while you
> are installing the starter....a mini starter does
> work better....With a 
> 727.....if you are using an after market  shifter
>  it is best to have that installed and working
> before you put the 
> headers on.....
> 
> Jim
> 
> 



 
____________________________________________________________________________________
Food fight? Enjoy some healthy debate 
in the Yahoo! Answers Food & Drink Q&A.
http://answers.yahoo.com/dir/?link=list&sid=396545367


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/