holy shit man thats awsome, good job and have fun own some honda boys
for us =)
Davis Martin wrote:
> Well last night My son was just comming home as I was beginning to
> type so I had to run.
> My 401 I have been slaveing over every spare moment all summer was
> broken in on the engine dyno last night. I was working so I called to
> get an update at 3:30 and it had been broken in was running fine and
> the inner valve springs were being installed. They run a shop carb to
> be sure of trouble free breakin period. That carb is a holley 830 cfm.
> So he called me back at 530 pm and had made a first pull with the
> timming set at 35 degrees and only brought the revs up to 6000 and it
> made 520 HP( my goal was 500) keep in mind it is 10.39:1 compression
> and running on sonnoco ultra 93 octaine. This was with the indy intake
> which I had done some port work to the plennum and gasket matched the
> intake runner ports.
> Today I am going over and we will play with different carb try carb
> spacers and change intakes and swap header sizes. If I have time I
> will be testing a ported and airgapped torker and I have the Herman
> Lewis intake that has been port matched to the heads.
> Now I am REALLY gonna have rear suspension issues!
> Davis Martin
> Amc Team
>
Automotive advertising | Automotive lifts | Automotive dealer new car |