[BaadAssGremlins] Re: Back in the amc way
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Re: Back in the amc way



Yes, I am on East Mountain, south side of scranton. 

So can I see your house from here?

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, GrublinX@... wrote:
>
>  
>  
> PROFERRA'S PIZZA! 
> I am assuming you must be in the greater Scranton area! 
> Charlie in NE PA
> 
> Charlie "Cool Factor X" 
> 
> In a message dated 9/16/2006 2:53:25 PM Eastern Daylight Time,  
> djdave@... writes:
> 
> Hello,  people. It's been a long time. How long?
> I was 17 when I bought my first  (used) gremlin for $127.00 and 2 boxes
> of Proferra's pizza (had to be right  from the pizza place, not store
> bought) It was a 74 plain jane 6  cyl.
> When that car was all but dust, I ended up buying a 73 levis with  a
> 304. I bought a 75? ambassador cause it had a 360/727, that
> eventually  made its way into the gremlin. That was about 18 years ago. 
> Since then, I  found myself wanting another gremmie, and wanting to do
> all of the things  to it that i could not afford back then.
> I recently bought a 74 gremlinX  that was on ebay. It's a wreck. It
> needs ALOT of work, but  the
> uniframe/floorwellsuniframe/funiframe/floorwells<WBR>/quarters/<WBR>f
> Pennsylvania, and found the car close to Fargo North Dakota. It  is
> truely a calif. car. all of the rust is surface rust only. Well  woth
> the 1500 mile trec (1 way) to pick it up. 
> I am about to dive into  this car 100%. What I want to know, some of
> those things I want to do, have  they ever been done to a gremlin
before?
> I have been looking high and low  but cannot find a gremlin with shaved
> doorhandles and locks, or power  windows. Nor have I seen any
> substituted interiors. Iwas thinking of using  a dash, console, seats,
> and column from a 2001-2003 PT Cruiser. 
> I am  also looking for a 401 to put in the gremlin, it need not be in
> good shape,  as I plan on (re)building the motor myself. 
> I also need a drivers side  door. The one on the car is caved in
> pretty good. I could fix it, but it  will need alot of attention. 
> Also, is there a patch panel available for  the door nader pin area?
> was thinking I am going to ned to mig a piece of  stock from the
inside. 
> 
> djdaveinpa
>






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated