Re: [BaadAssGremlins] Rack and pinion steering
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Rack and pinion steering



If I'm gonna go this is the way....Amen and AMC ya.       'The Mix' 
 
-----Original Message-----
From: AMC74HORNET@xxxxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Sent: Tue, 16 May 2006 13:07:45 -0400
Subject: Re: [BaadAssGremlins] Rack and pinion steering

You read my mind Gary. Certified welder or not it is not an acceptable
or safe method to weld steering components. 
"Doc"



------------------------ Yahoo! Groups Sponsor --------------------~--> 
<FONT COLOR="#000099">You can search right from your browser? It's easy and it's 
free.  See how.
</FONT><A HREF=""http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/YtqqlB/TM" target=_blank>http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/YtqqlB/TM"><B>Click 
Here!</B></A>
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
Attached Message
From: themixtoo@xxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: Re: [BaadAssGremlins] Rack and pinion steering
Date: Tue, 16 May 2006 10:44:19 -0400
Ed, I have installed a rack-n-pinion setup off an old Subaru (manual unit off '80-84, cheap as dirt around here Like 40-50 bucks at the JY). I'm still sorting out this thing. I cut the jap metric inner tie rods off and welded the AMC inner theaded tie rod end to it. Made custom mounts welded to the front crossmember and shortened the steeing column shaft, installed two universal joints and the Subaru flex joint at the rack end. It's not perfect yet but like I said I'm still 'tweaking' it. This is on  'The Mix 2'. I'm sure someone makes outer tie rods that would fit the AMC spindle and have the same metric thread as the 'Ru inner tie rod so no welding would be neccisary, but at the time I started this conversion I had some time constraints. And yes Doc I know welding in the steering system is a NO-NO but I've never had a problem yet (allways made sure I had a certified welder doing the final welding for me).  Gary 'The Mix'    
 
-----Original Message-----
From: Ed Veneck <edveneck@xxxxxxxxx>
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Sent: Mon, 15 May 2006 17:19:54 -0700 (PDT)
Subject: [BaadAssGremlins] Rack and pinion steering

Has anyone every converted their Gremlin over to a
rack and pinion steering setup?
Ed


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


------------------------ Yahoo! Groups Sponsor --------------------~--> 
<FONT COLOR="#000099">You can search right from your browser? It's easy and it's 
free.  See how.
</FONT><A HREF=""http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/YtqqlB/TM" target=_blank>http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/YtqqlB/TM"><B>Click 
Here!</B></A>
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Check out AOL.com today. Breaking news, video search, pictures, email and IM. All on demand. Always Free.


YAHOO! GROUPS LINKS






Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated