What are you guys using for the silver paint? I've been trying to decide whether to go back as near original on the grill as I can get or to prep it for painting to match the body when it is painted. My grill (72 Grem) has some wind burn with no paint on it and thus the surface texture is inconsistent. It's not unusual for them to sanded smooth and painted. Thoughts? Bill Dallas, TX --- In BaadAssGremlins@xxxxxxxxxxxxxxx, AMC74HORNET@... wrote: > > Bill at least one good thing is I don't have a problem with the > headlight doors. They were fine and I also have a spare set I got in > that bunch of parts I got from Davis. The only problem was the time it > took me to mask them up properly to spray paint the silver. I think it > took 2-3 hours a headlight door. The grill is going to be a nightmare to > mask as there are 6 different sections. After painting the silver with a > spray can I still have to paint the edge of each individual rib in each > of the 6 sections by hand with a brush. I still have a few > re-enforcement ribs to install yet and make the tabs on each side of the > grill to hold the plastic plug that the headlight screws to. I have > already used up almost 2 tubes of the Plastic Welding System epoxy. I > think I will pick up another one just in case so I don't run out. I > added 12 small plexiglass ribs between the 6 grill sections and and an 8 > inch piece of 1/2 inch square plexiglass in the notched area for the > hood latch release. I was amazed how much stronger the whole grill is. I > still have to notch and round off the 1/2 inch square piece a little but > it will still be much stronger as this was the biggest weak point in the > whole grill. I guess AMC never figured we would still be driving > Hornet's and Gremlin's after 36 years. :-) > "Doc" > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/