Re: [BaadAssGremlins] Sent a couple of photos to Car Craft/ Davis' engin
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Sent a couple of photos to Car Craft/ Davis' engine



Joe,
 that's cool I was thinking of doing the same thing. I dropped off the Mondello SFI approved flexplate to my machinist yesterday and he had the crank setup on the balance machine with the bob weights and the romac SFI harmonic balancer ready for the flexplate to balance my engine. He also showed me the rods all done with bronze bushings in the top and resized bottom and balanced and deburred. Then he asked if I wanted to see the pistons DUH! They are HUGH! The top ring land is like 3/8" thick! (made to take a 300 N2O shot) Not that I'm gonna do that
 He said my engine should be ready for asembly next week. I will be doing the assembly.
 Now I gotta get busy on the body!
 Davis

jgray_55 <jgray_55@xxxxxxxxx> wrote:
Well, I'll wait and see if they are interested. I just emailed two
shots of my 72 Gremlin to CarCraft magizine.I included a description
of the upcoming 401 swap,specs....etc Can't wait to see if they want to
use it for the readers pages!!Wish me luck.....Joe. ps...HOPE to get
my 401 back from the machine shop in the next week or so!!!!!
YEEEEHAAAAA!!Can you say..WAAABAAAAAA!!






Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/






SPONSORED LINKS
Automotive maintenance Automotive radiators


YAHOO! GROUPS LINKS






Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated