Brad my son checked for me last fall. I don't know what a full set costs as they did not have the right ones I needed. I would have gotten an employee discount because my son worked for them. My son no longer works for them. Call up your local Mopar dealer and ask for a set for an 88 Eagle.. Grab them while they are still available. "Doc" Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
--- Begin Message ---How much would a full set cost??
- From: "Brad Jones" <wagonmasterx5@xxxxxxxxx>
- Date: Thu, 02 Feb 2006 09:54:12 -0000
--- In BaadAssGremlins@xxxxxxxxxxxxxxx, AMC74HORNET@... wrote:
>
> Only 4 door sills are still available from Das Mopar as the last
real
> AMC's were 4 door Eagles. My son worked for the local Mopar dealer
and
> checked for me.
> "Doc"
>
>
> --- In amc_club_of_socal@xxxxxxxxxxxxxxx, AMC74HORNET@ wrote:
> >
> > Boy do I wish some one made repo door sill plates. My son said he
paid
> > 30$ for 2 for his Javelin.These are one real PIA to try to make
to look
> > decent. Start out by washing with lacquer thinner, then with a
small
> > brass wire wheel in my dremil clean out the ribs. Then with
assorted
> > small hammers and picks remove the dents and dings as best you
can. Then
> > wet sand to remove the scratches and corrosion pitting with 400#
sand
> > paper and then go to 600# sand paper. I got 20 hours into one
sill so
> > far and am only half way done with the 600# sanding. Next is
sanding
> > with 1000# and then crocus cloth. Finally polish with Autosol
metal
> > polish. There is 100% difference between the one that is almost
half way
> > done compared to the other one which was just washed with lacquer
> > thinner. I hope the dazzle of the chrome like polished finish
will hide
> > some of the dings and dents that were not able to be removed
perfectly.
> > I spent around 5,000$ on this interior and would gladly have
coughed up
> > the money for repo or NOS sill plates.
> > "Doc"
> >
>
> Rumor has it that the door sills can be bought through mopar, but it
> doesent have any of the etching or details.
>
--- End Message ---