How much would a full set cost?? --- In BaadAssGremlins@xxxxxxxxxxxxxxx, AMC74HORNET@... wrote: > > Only 4 door sills are still available from Das Mopar as the last real > AMC's were 4 door Eagles. My son worked for the local Mopar dealer and > checked for me. > "Doc" > > > --- In amc_club_of_socal@xxxxxxxxxxxxxxx, AMC74HORNET@ wrote: > > > > Boy do I wish some one made repo door sill plates. My son said he paid > > 30$ for 2 for his Javelin.These are one real PIA to try to make to look > > decent. Start out by washing with lacquer thinner, then with a small > > brass wire wheel in my dremil clean out the ribs. Then with assorted > > small hammers and picks remove the dents and dings as best you can. Then > > wet sand to remove the scratches and corrosion pitting with 400# sand > > paper and then go to 600# sand paper. I got 20 hours into one sill so > > far and am only half way done with the 600# sanding. Next is sanding > > with 1000# and then crocus cloth. Finally polish with Autosol metal > > polish. There is 100% difference between the one that is almost half way > > done compared to the other one which was just washed with lacquer > > thinner. I hope the dazzle of the chrome like polished finish will hide > > some of the dings and dents that were not able to be removed perfectly. > > I spent around 5,000$ on this interior and would gladly have coughed up > > the money for repo or NOS sill plates. > > "Doc" > > > > Rumor has it that the door sills can be bought through mopar, but it > doesent have any of the etching or details. > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/