RE: [BaadAssGremlins] Starting to clean the bare engine bay. Any pointer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [BaadAssGremlins] Starting to clean the bare engine bay. Any pointers



Rod, I performed this task on one of my non-AMC cars with the engine in and
took it to bare metal.  Started using those 3M paint stripping disks - what
a mess and way too much work.  Changed to a non-toxic paint stripper that
you can get at Home Depot or Lowes, which worked great.  Used spray paint to
repaint, worked well.  Eastwood has a wide variety of part-specific paints
to make everything look just right.  Only mishap I had was using a degreaser
to clean the outside of the oil pan as I was painting the engine too.
Degreaser ran onto my arm which resulted in a chemical burn similar to a
sunburn.  I'd use Simple Green next time.  Good luck, it makes a big
difference.

Dave





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated