Re: [BaadAssGremlins] Re: [AmericanMotorsModelBuilders] TurbineWheel Kno
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re: [AmericanMotorsModelBuilders] TurbineWheel Knock Off Emblems



Thanks Davis. I will have some pic's real soon of the interior and the
wheels. The car is really starting to shape up. To bad we couldn't skip
winter this year and it be spring time next month. I have only driven it
2 days in the last 9 months but at least I am able to drive the yellow
car every day. Soon I will have to start using my Malibu again daily.
"Doc"



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
--- Begin Message ---
Awsome Doc!
 Davis

AMC74HORNET@xxxxxxxxx wrote:
All I know is they are almost finished. All I can say is they look
great, but what a pain in the a$$ to make. Very time consuming.
Especially the last piece which the R/W/B AMC emblem is painted on. Good
thing I have a dehydrator and used it to dry the paint. I spent 3 hours
assembling them yesterday and put them in the dehydrator to cure the
super glue over night. I will give them a light scuffing with 1000# sand
paper today and put 2 coats of clear over them. I picked up some
Plasticote engine paint clear to use on them. I figure that it will seal
everything together and being engine paint it will give good protection
against the elements. Now I just have to finish cleaning the wheels and
scuff the area in between the spokes up and paint them with self etching
primer and then paint them the orange body color. I know they will look
real nic e as I did it to an orange 74 Hornet promo I put the same style
turbine wheels on I got out of a 62 Vette kit. On the real car with the
knock off's 3 dimensional emblems the completed wheels should look
outstanding.
"Doc"



------------------------ Yahoo! Groups Sponsor --------------------~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~->


Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

To: AmericanMotorsModelBuilders@xxxxxxxxxxxxxxx
From: lhartmanjr@xxxxxxxxxxxxxxxxx
Date: Wed, 2 Nov 2005 19:29:14 -0500 (EST)
Subject: Re: [AmericanMotorsModelBuilders] Turbine Wheel Knock Off Emblems

Those center caps are going to look great! I wonder if a person could encase something like that in clear cast resin?

Lee

-----Original Message-----
From: AMC74HORNET@xxxxxxxxx
Sent: Oct 31, 2005 7:10 AM
To: AmericanMotorsModelbuilders@xxxxxxxxxxxxxxx, BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: [AmericanMotorsModelBuilders] Turbine Wheel Knock Off Emblems

I can't ever do anything simple. I made the center discs and was just
going to paint the R/W/B AMC emblem on them after I painted them orange.
That was until I noticed the plastic emblem on the rear panel under the
hatch. It is 3 dimensional so I am duplicating it. First I cut and glued
2 rectangular pieces of sheet plastic together for the base and painted
it black. The I glued 2 more together slightly smaller pieces and
covered them with modelers bare metal chr ome foil. This one will be
glued to the black base showing a black edge. Then I will over the bare
metal foil I will glue on a smaller piece with the R/W/B emblem painted
on it. So it will have a black edge a chrome edge and then the R/W/B AMC
emblem. After I make 4 of these I will then glue them to the orange disc
and mount them o the wheels. It should look like it came from the
factory like that.
"Doc"





Yahoo! Groups Links









--- End Message ---


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated