[BaadAssGremlins] Re: Was Hand Brake "T" Handle On eBay Now Motor Mite And Progress

["amc74hornet" <AMC74HORNET@xxxxxxxxx>]

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, <eddiestakes@xxxx> wrote:
> Doc, on your wiper delay, something you might try doing before you elimanate 
> it is see if it is properly grounded. Sometimes the single bolt that holds 
> this to the lower dash is not grounded. Smetimes the little factory black 
> wire that goes into the harness is not grounded either. So bypass it with 
> another ground wire, touching the opposite end of it to stuff like steering 
> column, key metal thing in column, anything metal to see if it makes a 
> difference, all the while having the wipers in the 'on' position. Can't tell 
> you how many times I have had to run a seperate ground wire to my wipers on 
> any AMC, the last one being my 82 Eagle a few months ago. Rather than trace 
> the factory black ground, I just bypassed it and ran a ground to metal part 
> of brake brace and no problems since. If you only need to move the little 
> relay box around however then limited space to do that under there, might 
> reconsider moving the manual choke pull instead.
> Eddie Stakes'
> Planet Houston AMX
> 713.464.8825
> eddiestakes@xxxx
> www.planethoustonamx.com
> email volume is currently
> HEAVY; 7-12 day reply time;
> please call if important
> Doc wrote:
>  I was going to eliminate the wiper
> > delay but due to  plug problem in the cars main wiring harness I am
> > forced to keep it. But since I installed a manual choke the relay box
> > for it will not fit in the stock spot under the dash. I had to make a
> > bracket and move it over 1", I didn't want it rattling around under the
> > dash.

Eddie there is nothing wrong with the wiper delay. It works fine, I just didn't want it or like it so I tried to eliminate it. The plug in the cars main wireing harness is different and won't plug into a non-delay wiper switch so I am stuck with it. The choke pull is just to the left of the vent pull and it along with the vent pull has billet knobs and looks factory in that spot. It only took me an hour to make a bracket to move the delay box over 1 inch.
I lost a day's work yesterday as I had to be around when the landlord came to repair a multitude of problems in my apartment's bathroom. So today I will be going back to work on the car.
Doc"
































------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/