[BaadAssGremlins] Floor Repair Progress

[AMC74HORNET@xxxxxxxxx]

Even with the horrible heat last week I finally made some progress on
the floor repair. I have 3/4 of the floor painted with a rust proof
paint and the Dynamat installed. Once I started removing the factory
sprayed on rubberized coating on the floor by the drivers feet I found a
bit more rust than I expected but it is not to bad. It when cut out is
in the shape of a "T" 2 inches wide and 12 inches long at the firewall
to floor seam and back 2 inches wide and 6 inches long above the frame
rail. I awkward shape patch to make and fit in one piece. So I will make
it in 3 pieces for ease of fitting it. I have one piece made and fitted
and the second cut and partially fitted. It was just to hot to do any
more so I went home. This week I should have the patch finished the
Dynamat installed and the carpet going in and the base cushion of the
back seat. Now if I could only get the upholstery guy to start on the
drivers seat I would be happy. Next is the dash swap, and the re-painted
package tray and the factory gauge pod with the Auto Meter gauges.
"Doc"



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/