--- In BaadAssGremlins@xxxxxxxxxxxxxxx, AMC74HORNET@xxxx wrote: > Just bring a set of shoes and have them matched up, that is unless you > are going to one of them chain stores manned by idiots that only know > what a computer tells them and can't read a book. Sounds to me like you > got the standard Hornet 6 cyl. brakes. I never had a problem getting > brake parts for both my 74 Hornets. One has the stock 74 Kelsey Hayes > disc/drum set up and the other one has the stock Bendix disc/drum set up > off of a 79 Concord. I never go to a chain store for parts. I been going > to one local independent parts store 25 years now. > "Doc" Doc, Thanks. I noticed that there is a note on the drum surface that says 9.06" max machined diameter. So I took a pair of shoes over the the local parts store and asked for the shoes for a 73 hornet (their computer indicated that those were 9" shoes). They matched right up. Thanks again for all the help. Dan Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/