My Gremlins engine bay looked like crap when I bought the car last year. The car had been hit in the left front fender and the Amc dealer that fixed it just slapped on a new fender and hammered out the valance panel and not very well either. Open the hood and the drivers side inner panel forward of the shock tower was bent beyond repair. The Pass side had a battery explode at one time and it covered the entire engine bay with acid so the paint is shot. It also ate through the pass side inner fender just in front of the shock tower and the flat panel spot welded to the radiator support. If that werent enough, it ate the front frame horn out starting at the bumper shock plate forward. So tonight after looking at it for a year and it making me livid! I took the Sawzall and cut that DAMN thing off right in front of the idler arm. The valance panel may be saved. In fact it has too, I cannot find a replacment valance panel anywhere. And my inner front panel behind the headlight is rotted out. EESH!!!! You look at the rest of the car and its as if there couldnt be a speck of rust anywhere!! But.....A few months back I rented a gas powered sawzall and cut the frame horn and the battery tray panel out along with the drivers side panel at the local pick and pull. I couldnt find a inner panel that spot welds to the rad support though. But man it sure felt good to cut the rusty damn frame horn off!!!! Anyone got any Body parts laying around??? Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/