Re: [BaadAssGremlins] Last nights work
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Last nights work



Doc,
 You are right on all counts!
 Davis

AMC74HORNET@xxxxxxxxx wrote:
You got a lot of work done Davis. I am nervous now as I have to remove
the door hinges on my orange car this coming week to install new hinge
pins and bushing's and the last thing I need is to break any bolts off.
I think I will soak all the bolts real good with blaster for a few days
before trying to remove them. The roll bar is a wise move on your Race
Gremlins. The driver of your team car probably would not have survived
without it in that wreck.
"Doc"



------------------------ Yahoo! Groups Sponsor --------------------~-->
Help save the life of a child. Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/YtqqlB/TM
--------------------------------------------------------------------~->


Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

To: BaadAssGremlins@xxxxxxxxxxxxxxx
From: "Davis" <martin-davis@xxxxxxxxxxxxx>
Date: Sat, 30 Apr 2005 12:32:19 -0000
Subject: [BaadAssGremlins] Last nights work

Well yesterday I worked on the black car for about 5 hours. I got her
running again, starts right up now and runs good. I even did a little
holeshot in the driveway! Couldn't resist. I finished taking the doors
off. 3 bolts broke off on the drivers side F%$@^%@#%$#!!!! That's gonna
be a pain in the assessets. Then I took the rest of the interior out,
and cut out the roll cage. The only thing left is the dash, windshield,
and the drivers seat. I started sanding the pas side fender on a saw
horse. Decided to sand to bare metal on the fenders. I have one fender
1/3 sanded now. I also did alittle sanding on the rear of the car. Boy
I can tell ya I have A LOT of sanding to do.
Why did I cut out the roll cage you ask?  I welded it in the wrong
spot originally. Too far forward. So i will install it into the rwb car
and I have a brand new cage for the black car. Even though the new NHRA
rule is that a cage is not required till 11.5 I will not race without
one after seeing what happened to the Amc Team BBO Gremlin. I don't see
there being much difference crashing at 107 MPH or 130 MPH. As you can
see from the pics in Bill's file without the cage the car would have
been a pancake.
So anyway that is my progress so far.
DAvis





Yahoo! Groups Links



Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated