It was easy to do, Bart. You have to take out the head lights, disconnect them, and thread the plugs back through the front wall. I backed the plastic ties out with a hammer and unscrewed all the other metal hangers. Then I hung them over the side of the car and put them inside a white plastic trash bag to keep them all together. I took off the brake lines but cut a couple of them off on the sides since I will be bending new ones. Oh yeah, I disconnected the washer tubing also and bundled it up along with the wires. ~Lu~ --- In BaadAssGremlins@xxxxxxxxxxxxxxx, baadass73gremlin@xxxx wrote: > > In a message dated 3/14/05 9:30:40 P.M. Eastern Standard Time, > lumina333@xxxx writes: > > I took advantage of the nice weather here this weekend. I finally > finished sanding and prepping the engine bay. I put 2 coats of > primer/filler on it. I even took the wiring harness, brake lines, > and headlights off to get to all the nooks & crannies with > sandpaper. See a photo of my work in my file. ~Lu~ > > > > Lu,how hard was it to remove the wiring harness? > Bart ------------------------ Yahoo! Groups Sponsor --------------------~--> Give the gift of life to a sick child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/