In a message dated 2/22/05 9:48:42 P.M. Eastern Standard Time, dsinks@xxxxxxxxxxx writes:So yes the 401 is stock 73 specs and I do not have a stock 4bbl for it, unfortunetly.im sure I can find one for now.if your gonna use the torker only to break in the motor and not drive it then use the torker.But don't go driving as it will run never run right as the torker is a mid range single plane intake that comes alive at about 3 -3500 rpm. honestly dude,i'd look on ebay or around for a edelbrock performer intake as its a dual plane intake and works well with stock-mild motors and that way you could safely drive your gremlin until you have all your go fast goodies for it.Bart