Re: [BaadAssGremlins] This carb ok for now?With this intake?

[baadass73gremlin@xxxxxxx]

In a message dated 2/22/05 7:14:56 P.M. Eastern Standard Time, dsinks@xxxxxxxxxxx writes:

Ok I'll get it, I figure i'll run my engine for a while and break it in stock with the 600 edelbrock.

After that I'll swap in the cam and see if I can step up to a 750 holly or edelbrock.

but the only intake I have is a Torker.  Think this will work with the stock setup 401and the 600?

 

Sorry, Im a fuel injection guy this is all greek to me, I know I'll need the torker with the hotter cam but with a stock set-up is it ok to run?

is your 401 rock stock?if so i wouldn't use the Torker as it kicks in midrange and with that lil 600 cfm carb you'll be qoute un qoute'pissing in the wind' i'd reuse your factory 4 v intake if you have one.So your saying you rebuilt your 401 to stock specs?

Bart

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/BaadAssGremlins/
   
• To unsubscribe from this group, send an email to:
  BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.