Re: [BaadAssGremlins] Re: Crap Box Gremlin Gets Attention...[1-31]

[baadass73gremlin@xxxxxxx]

In a message dated 2/2/05 12:21:06 P.M. Eastern Standard Time, MrSimms7@xxxxxxx writes:

Bart - I've been workin on cuttin back a fiberglass patch panel I
made on the car so I can get down to metal and do the wheel tub
right...then after I get the piece welded in I'll just re-glass
around it... ;D

What i meant Jon was stuffing bondo into rot holes only no metal or prep work thus your gremlin would weigh a ton afterwards if you only did the stuff and sand bondo job i.e Bondo is ONLY good for filling over bumps,dents and skimming over metal work,and you coukld use glass on some stuff if you do it right i agree hell i got some glass in the top cowl on my grem where some rot was

Bart

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/BaadAssGremlins/
   
• To unsubscribe from this group, send an email to:
  BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.