Re: [BaadAssGremlins] Part Needed

From: harold losey <strlcuckoo_46@xxxx>

Date: Mon, 10 May 2004 03:51:10 -0700 (PDT)

Davis,

Why I do believe a 401 for my 74 Gremmie X would be a nice bonus, for me. Thought I had one from a 72 Jav but the vin was stolen and could not get to the block. This guy had a good deal on two 72s one with a 360, one with no vin but the engines were about all that was salvagable so we passed unless he comes down a bit. Thought could put one in the Gremmie Grape and the other in one of my Javelins after I won the lottery. And now my driver Javelin has rear end problems. Guess I'll be broke a while longer .

Hal

Davis Martin <martin-davis@xxxx> wrote:

Harold,

Thanks for keeping me in mind. Let me know what you come up with. A 401 would be a nice bonus :o)>

Davis
harold losey <strlcuckoo_46@xxxx> wrote:

Davis,

We are going to a different yard next Sunday that has about 4 Gremlins and will be pulling all good grills from them so check in about a week.

I'll also see about your window regulators "DOC"

Davis Martin <martin-davis@xxxx> wrote:

Yup that would be a 76. The grille I need is a one piece grille.

Thanks,

Davis

harold losey <strlcuckoo_46@xxxx> wrote:

Davis,

We pulled one grill but I think it was a 76, as it had round turn signal housings and bad headlight covers.

And Doc all the two door cars were Concords.

Davis Martin <martin-davis@xxxx> wrote:

Hal,

I need a 72 gremlin grille if you happen across one.

Thanks,

Davis

harold losey <strlcuckoo_46@xxxx> wrote:

Doc,

Check with me on Monday as my buddy and I are going to a yard w/Gremlins and such on Saturday and I will try o get a couple inexpensively for us as my Gremlin's drivers side has a "roll-up" problem that seems unfixable by this mortal. And Eddie do you need any parts you have not told Mike Lakin about??

Oh yes, Great news that Lady Justice did smile upon both of you( Doc & Eddie).

Hal

amc74hornet <AMC74HORNET@xxxx> wrote:

Anybody got a drivers side window regulator for a 2 door 74 Hornet/Gremlin? I need one for the Yellow car. Later years will fit but it will also have to come with the small 4 inch long metal track that bolts to the inside of the door. Some time in the mid 70's they changed the diameter of the plastic roller on the regulator that fits the track and you have to have the propper track for that regulator. Also the later ones were riveted in but can be used in the earlier car by welding 1/4" USS nuts to the regulator and bolting it in. "Doc"

Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs

Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs

Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs