--- In BaadAssGremlins@xxxxxxxxxxxxxxx, Davis Martin <martin-davis@xxxx> wrote: > Doc, > Yup I got the drive kit and it works great. I cleaned and painte dit and modified the mount to fit. > Davis > > et <AMC74HORNET@xxxx> wrote: > --- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Davis" <martin-davis@xxxx> wrote: > > Well I put a street aluminum oil pump kit in my 360 and buttoned up > > the cooling system last night. Today I started her up and drove her > > outta the garage. Ran for about 2 hours. Kept a steady water temp of > > 170 degrees F and a constant oil pressure of 55 lbs at idle. Ran into > > a couple of minor peoblems. 1 melted the shifter cable on the header > > cause I forgot to zip tie it back and 2 broke the original throttle > > cable but lucally had a spare. > > Wife callin will continue update > > Davis > > Good deal you sure had a nice day weather wise to work on it. Did you get the electric water pump kit you won yet? I am hoping to get a little work done on the new Hornet tomorrow afternoon. I need to get some grease on my hands working on the car instead of plastic glue and sanding dust. At least it starts easier since the weather is warmer. I still need to install that manual choke and rebuild the carb. > "Doc" > > > > --------------------------------- > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/BaadAssGremlins/ > > To unsubscribe from this group, send an email to: > BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. You got a pic of the water pump set up? I'd like to see it if you have one. Also did you install the electric cooling fans you were speaking of? I'd like to install some kind of auxillary cooling fan in the new Hornet but am limited space wise as the car has A/C and the condencer takes up a lot of space in front of the radiator. I am also adding an axillary trans cooler like the yellow car has. "Doc"