Gauge Panel Resto
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Gauge Panel Resto
- From: "amc74hornet" <amc74hornet@xxxx>
- Date: Wed, 21 Jan 2004 11:15:39 -0000
Yesterday I spent 3 hours sanding the gauge panel with 400# sand paper and primed it with PlastiKote Super Primer. It came out spotless out of the Castrol Super Clean. In order to insure a good bite for the primer I had to make sure ever bit of it was sanded and it took quite sometime. I have to run some errands today and when I get back I will polish out the dash center piece and put the gauge panel in the dehydrator for a day or two too cure the primer. And also check the glove box surround that is soaking in Castrol.
"Doc"
Back to the Home of the AMC Gremlin