http://www.frankscustomfiberglass.com/AMC.htm

["hh7x@xxxx" <hh7x@xxxx>]

http://www.frankscustomfiberglass.com/AMC.htm


OK - lets' try this again ...

Regarding the request in the ' Look Out fir This '
feature of the BaadAssGremlins Grp. :

You should check for that '77 AMX front air dam
at the above address .

If he doesn't have it 'Right Now' - tell him that
there are a few people looking for this one piece
front air dam - as after '77 they were Two Piece -
since AMC got complaints that if an owner 
snagged on something - it would tear up both
front fender well flares - and - if the car was run
upwards of 80mph + , it messed with those
same flares etc. 

Franks does have a *nice* FiberGlas hood for
the Gremlin / Spirit cars - comes with the 1970
AMX scoop .

This is a "pin on " hood - not a bolt on , which
will run $500.00 and change. 

The pin on is roughly$225.00 .

"Trick It" :

Take a die grinder and grind off the edge - 
all way round - of a spare hood , allowing 
the removal of the metal skin .

Now take that pin on skin and a Marine
FibreGlas boat patch kit and Glas that 
skin to the metal superstructure .

Get some Balsa Wood strips - to brace
the hood skin areas with - Glas those in.

Pattern should look like > * - a sorta'
star pattern . 

You can get Balsa in 3/4 inch or thicker 
'boards' at a hobby shop or online.