For all those putting a 727 tranny in a Gremlin, read this.

["fatpillowman" <petriew@xxxx>]

Hi all,

Bart and I have already gone thru this problem. I did some research 
today and came to the conclusion that AMC did not make a driveshaft 
for a Gremlin with a 727 tranny. The biggest factory engine that was 
put in was a 304. Every TSM that I looked at (71-76) said that the 
304 had optional Automatic tranny, but it was usually a 998. A 727 
was NOT an option. I will check the 77-78 years too, but I'm sure 
they will not yield new information concerning this.

>From my knowledge, AMC only put 727's on the 360-401s.
Therefore, if you plan to use a 727, you MUST shorten a driveshaft 
from something else (that used an AMC20 rear and a 727).

If someone has conflicting informatin, please don't hesitate to let 
us know!

Thanks.