[BaadAssGremlins] Upholstery Progress

[AMC74HORNET@xxxxxxxxx]

I called about my other 500 buttons yesterday and they are still on back
order. I taped the hatch upholstery template to the hatch and drilled
and threaded the screw holes to mount the panel on. I picked up 20
stainless screws and trim washers for mounting it. I also had to make 20
plastic  washers to go under the stainless trim washers so they would
not cut into the vinal when the screw is tightened up. Luckily I have
all sorts of assorted thicknesses of sheet plastic I use in my model
building. It still was a pain and took me 3 hours to make them. Today
the panel gets installed  for a test fit and next week the inside of the
hatch gets painted and the panel permanently installed. I  have the new
hatch area side and rear panels to make next and some plastic parts to
still paint. I am also splitting the hidden compartment door and making
prop rods for them. The end brackets for the doors need to be removed
and sand blasted and painted. Also I am installing a new 60's style fuel
tank vent from the roll over valve eliminating the lines and charcoal
canister.
"Doc"












------------------------ Yahoo! Groups Sponsor --------------------~--> 
Help save the life of a child.  Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/