I started to check all the materials to assemble the custom hatch upholstery panel and found the washers needed to go inside the buttons mounting ring have the proper 1/8 hole diameter but the outer diameter of the washer is about 1/64 to large to fit inside the mounting ring. I checked to see if I could use another size washer but if the outer diameter of the washer is small enough to fit into the mounting ring the center hole is to small. Being a model builder I have a small modler's 4" bench style grinder that I am using to grind the washers the 64th they need to fit. Talk about a labor intensive boring job. I spent 4 hours yesterday and only did 81 washers. The hatch panel takes 60 and the rest of the interior will take about 500 approximately. Since I am stuck in the house again today I guess I may as well get going on grinding some more since there is not anything else I can do for my cars. "Doc" ------------------------ Yahoo! Groups Sponsor --------------------~--> Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research, Blue Book, Compare Vehicles, Buy Used http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/